Dive Centre
You have no items in your cart.


Aqualung Micro Mask

CODE: 108500
PRICE: $139.00

This is one of our biggest selling masks, super comfortable fit, great vision, and the lowerst volume mask we sell apart from the Sphera! Hugely popular with Freedivers as well as Scuba Divers.

The Micromask is a revolution in mask design. Its innovative, patented structure makes it possible for the lenses to fit in the ocular orbit. Never before have lenses been so close to the eyes. This not only results in an amazingly wide peripheral view but an extremely low internal volume. While scuba divers love it, it is sure to be a favorite amongst the free diving community.

Extra low volume makes it very easy to clear

Features patented "cardanic" double joint buckles that rotate both up-and-down and in-and-out. This provides maximum adaptability and comfort to any head shape

The quick counterposed push button activation make the buckle easy to use even while wearing gloves












AVAILABLE TO ORDER - Estimated 5-7 day delivery

How to fit your new Mask

Fit is the most important thing when choosing a mask, so once your mask arrives, please follow this procedure to try and as closely as possible verify it will fit once you are in the water...

  1. First move the strap out of the way, look straight up at the ceiling so your face is as parallel to the ceiling as possible and put the mask in position on your face.
  2. Gently inhale (sniff) through your nose
  3. While you are trying to inhale, the mask should seal to your face and stop you being able to inhale through your nose
  4. As soon as you stop inhaling the mask might move and lose its seal, this is normal and doesn't indicate a bad fit. It is only while inhaling that it should seal, although sometimes if you inhale forcefully it will cause a vacuum and stay sealed, but this doesn't mean it is a better fit. If it seals while inhaling, that is a good start, if it leaks after several tries, the mask may not suit your face shape and you may wish to swap it for another model, please do so! (If you have a moustache and it's not sealing well because of that you should purchase our Moustache Mask Sealer sticks - they work!)
  5. If it sealed, the next step is while standing in a normal position, put the mask on with the strap and adjust the strap till it is comfortable. Gently inhale again and make sure it still seals. (Remember... over-tightening a mask can deform the shape of the skirt and make it leak more! Adjust the strap so the mask is tight enough not to move while swimming, never tighter!)
  6. If it passes both of these tests you should be ok once in the water. Well done you've found a proper fitting mask!

If you have any problems or questions fitting the mask please call us on 09 444 7698 during normal work hours so we can help.

Care and Maintenance - Mask

The following Care and Maintenance information is provided for products that do not have a specific owner's manual and is intended as a general guide for basic care and maintenance of your Scuba Equipment.

Mask Care and Maintenance
Care Before the Dive:

  1. During the manufacturing process, a thin film of silicone will develop on the glass lens. This film of silicone will cause rapid fogging that is resistant to conventional anti-fog measures. It is important to remove this film of silicone from the lens prior to your first dive. To remove the film you will need to scrub the lens inside and out with a mild abrasive. A paste toothpaste is ideal but a liquid scrub will also work. Rub the cleanser into the lens with your fingers several times and then rinse clean thoroughly.
  2. Mask fogging is a normal occurrence, even after the film of silicone has been removed. Normal fogging can be easily prevented with after market anti-fog agents or saliva. Rub onto the lens and then rinse. Your dive will now be fog free!
  3. Some after after-market anti-fog agents contain formaldehyde, alcohol, or other substances that may damage the plastic materials used in your mask. If unsure, avoid prolonged exposure of the anti-fog agent with the plastic parts of your mask.

Care During the Dive:

  1. When entering the water either from a boat or a beach, place a hand over the lens of your dive mask and hold it securely in place. This will help ensure your mask stays in place during entry and will help deflect any direct impact of water on the lens caused by the jump into the water or any approaching waves.
  2. A typical dive staging area is a dangerous place for dive masks. Care should be taken to not leave your mask in a location where it might be exposed to dropping weight belts or tanks.
  3. It is best to avoid putting your mask on your forehead at any time during the dive. Several factors can cause the mask on your forehead to be dislodged and subsequently lost. If you want to temporarily remove the mask from your face, place the mask around your neck.

Care After the Dive:

  1. Soak in warm fresh water (not over 49°C) to dissolve salt crystals.
  2. Rinse thoroughly with fresh water and towel dry before final storage.


  1. Store in a cool, dry and protected place out of direct sunlight.
  2. Store separated from other dive gear as the black pigmentation of other equipment may discolor the clear silicone skirt of your mask.


  1. Avoid any contact with alcohol, oil, gasoline, aerosols, or chemical solvents.
  2. Do not expose any part to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.
  3. Do not use any type of alcohol, solvent or petroleum based substances to clean or lubricate any part.
  4. Do not store your equipment near any oil, gasoline, chemicals, or solvents.

All details, prices and availability are subject to change - All rights reserved Dive Centre Ltd 1972-2018